ServicesWhole Home Water Filtration
Whole Home Water Filtration in Eagleville
We test your water first, then install a whole home system at the main line that treats every tap and fixture. The work is done to plumbing code, with a bypass for servicing and a clear plan for filter changes. You get a written estimate before anything is cut.
Clean water at every tap, not just the kitchen
A whole home system sits where the water line enters your home, usually after the main shutoff and before the water heater. Everything downstream gets treated water: showers, laundry, the ice maker and the tank or tankless heater that would otherwise collect scale.
The right equipment depends on what is in your water. Sediment, chlorine taste, hardness and iron each call for a different filter or media, and a system built for the wrong problem costs money without fixing anything. Middle Tennessee sits on limestone, so hardness is common, but we confirm it with a test instead of assuming.
We also treat it as plumbing work, because it is. A filtration install changes your main line, and it should be done with the same care for code, bonding and drainage as any other connection on the supply side.
What the installation includes
- A water test before we quote
- We check hardness, chlorine, iron and sediment so the system matches your water. You see the results and we explain what each number means for your fixtures.
- Equipment sized to your home
- We size by flow rate, counting bathrooms and how many fixtures run at once. An undersized filter drops pressure in the shower; an oversized one wastes money.
- A three-valve bypass
- Every system gets a bypass loop so water keeps flowing to your home during filter changes or service. It also lets you isolate the unit without shutting off the main.
- Electrical bonding kept intact
- Where a filter interrupts a metal water line, we install a bonding jumper across it so your home's grounding path stays continuous, as code requires.
- A proper drain connection
- Softeners and backwashing filters discharge water. We route that line to an approved drain with an air gap so wastewater can never siphon back into your supply.
- Cleanup and a walkthrough
- We protect floors, clear out packaging and show you the bypass valves, the filter housings and when each cartridge or media bed needs attention.
Signs your home could use whole house filtration
White crust on fixtures
Scale on faucets, showerheads and glass doors points to hard water. The same minerals build up inside your water heater and appliances where you cannot see them.
Chlorine taste or smell
A pool-like smell in the shower or a sharp taste at the tap usually means disinfectant residue that a carbon filter can remove.
Orange or brown stains
Rust-colored marks in toilets and sinks often come from iron. Left alone, it stains laundry and fouls fixture cartridges.
Grit in aerators and screens
Sand or sediment clogging faucet aerators and appliance inlet screens shortens the life of valves throughout your home.
A new water heater on the way
If you are planning a tankless water heater installation, treating hardness first protects the heat exchanger and keeps the manufacturer's maintenance schedule manageable.
What moves the price
No two systems cost the same because no two water tests read the same. Your written estimate breaks out each part so you can see where the money goes. Financing options are available, and we accept all major credit cards and cash.
What the test finds
A single sediment and carbon stage is simpler than a setup that also softens water or removes iron. Each added problem adds a stage.
Size of your home
More bathrooms and higher peak flow call for larger tanks or housings to keep pressure steady.
Where the line enters
An open utility room is quicker than a tight crawlspace or an exterior entry that needs a weather-protected enclosure.
Drain and electrical needs
Systems that backwash need a nearby approved drain, and some heads need an outlet. Adding either changes the scope.
Permits
Where a permit applies, the fee and inspection visit are shown on the estimate rather than added later.
How an install day runs
- 1
Test and estimate
We visit, test your water and look at where the main line enters your home. You get a written estimate that lists the equipment, the fittings and any permit cost.
- 2
Permit where required
If your local jurisdiction requires a permit for the work, we pull it before the install date and schedule any inspection, so the paperwork is handled and on file.
- 3
Installation
We shut off the water, cut in the bypass and mount the system on a level, accessible spot. Most installs mean a few hours without water, and we tell you the window ahead of time.
- 4
Startup and checks
We flush the system, check every joint under pressure, confirm the bonding jumper and run the drain line through a full cycle before we leave.
Questions about whole home filtration
Will a whole house filter lower my water pressure?
A properly sized system should not cause a noticeable drop. Pressure loss usually comes from a filter too small for the home or a cartridge left in too long. We size by your peak flow and show you when to change cartridges.
Is a water softener the same as a filter?
No. A softener exchanges hardness minerals, while a filter traps sediment or removes chlorine and odors. Many homes need both, and the water test tells us whether yours does.
How much maintenance does it need?
Cartridge filters need changing on a schedule set by your water and usage. Softeners need salt added, and backwashing media tanks mostly run on their own. We leave you with a simple schedule written for your system.
Do I still need a filter at the kitchen sink?
A whole home system handles sediment, chlorine and hardness for the entire house. Some people still add a point-of-use filter for drinking water if their test shows something specific, and we will tell you plainly if it is worth it.
Do you install filtration in nearby towns?
Yes. We install systems in Eagleville and around Christiana, Murfreesboro, Franklin and the surrounding area, and the free estimate visit works the same way wherever you are.
Find out what is in your water
We will test your water, look at your main line and give you a written estimate with no obligation. If something urgent happens with your plumbing in the meantime, we answer for emergencies around the clock.